借用標題.....
買了一個WD 640G AAKS的新硬碟，我把系統轉過去使用，
可以正常工作。但是我搞定之後，想要備份時，
發現我的系統碟只有17GB的東西，但是用TrueImage備份
出來的映象檔，卻有27GB。我使用 noname xpe 上的
TrueImage超過一年了，以前從來都是映象檔會比原來
分割表內的東西小，怎麼會變成這樣？
試了好幾次，換了不同版本的TrueImage也都一樣，
到底哪裡出了問題？多謝！
-----------------------
自己找到答案了，可能：
1. 硬碟的 file system 可能問題，可以用chkdsk DISK: /r 檢查
2. 備份時可能勾選到 sector-by-sector 了，取消即可。
http://forum.acronis.com/forum/9801
There are 2 possible reasons of such behavior.
Corrupted file system;
Sector-by-sector backup.
To make sure that file system errors is not the issue I may suggest you to
check the drive for the errors:
Go to the Command Line (Start-Run -> cmd);
Enter the following command:
chkdsk DISK: /r
where DISK is the partition letter you need to check. Please note, that
checking the C: drive may require you to reboot the machine.
Additionally, please make sure that the mark Create and image using
sector-by-sector approach is not checked.
--
There are a lot of things we don't want to know about the people we love.
--- Chuck Palahniuk
--
買了一個WD 640G AAKS的新硬碟，我把系統轉過去使用，
可以正常工作。但是我搞定之後，想要備份時，
發現我的系統碟只有17GB的東西，但是用TrueImage備份
出來的映象檔，卻有27GB。我使用 noname xpe 上的
TrueImage超過一年了，以前從來都是映象檔會比原來
分割表內的東西小，怎麼會變成這樣？
試了好幾次，換了不同版本的TrueImage也都一樣，
到底哪裡出了問題？多謝！
-----------------------
自己找到答案了，可能：
1. 硬碟的 file system 可能問題，可以用chkdsk DISK: /r 檢查
2. 備份時可能勾選到 sector-by-sector 了，取消即可。
http://forum.acronis.com/forum/9801
There are 2 possible reasons of such behavior.
Corrupted file system;
Sector-by-sector backup.
To make sure that file system errors is not the issue I may suggest you to
check the drive for the errors:
Go to the Command Line (Start-Run -> cmd);
Enter the following command:
chkdsk DISK: /r
where DISK is the partition letter you need to check. Please note, that
checking the C: drive may require you to reboot the machine.
Additionally, please make sure that the mark Create and image using
sector-by-sector approach is not checked.
--
There are a lot of things we don't want to know about the people we love.
--- Chuck Palahniuk
--
All Comments