無線網卡 PCI介面安裝 - BBS

我用無線網卡想裝在freebsd 8.0 上
在官網上找支援的pci網卡
http://www.freebsd.org/releases/8.1R/hardware.html#WLAN

選定用型號GN-WP01GS 這張

插上去 重新弄kernel 可以看到有這張卡

ral0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:16:e6:3c:f9:53
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
status: associated

當我要設定它的IP時
#ifconfig ral0 10.77.77.254 netmask 255.255.255.0
ifconfig: ioctl (SIOCAIFADDR): Invalid argument

後來我在/etc/rc.conf中加入
ifconfig_ral0="inet 10.77.77.254 netmask 255.255.255.0"
開機都會跳出

ral0: MAC/BBP RT2661B, RF RT2527
ral0: [ITHREAD]
ral0: rt2661_load_microcode: timeout waiting for MCU to initialize
ral0: rt2661_init_locked: could not load 8051 microcode, error 5
ral0: rt2661_load_microcode: timeout waiting for MCU to initialize
ral0: rt2661_init_locked: could not load 8051 microcode, error 5
ral0: need multicast update callback
ral0: need multicast update callback
ral0: rt2661_load_microcode: timeout waiting for MCU to initialize
ral0: rt2661_init_locked: could not load 8051 microcode, error 5
ral0: need multicast update callback

黃色的字在man ral中有提到
The onboard 8051 microcontroller unit failed to initialize in time.
紅色的字在man ral中
An error occurred while attempting to upload the microcode to the onboard
8051 microcontroller unit.

Google也找不到解法

不知道有沒有人用過跟這張卡一樣晶片(Ralink系列)
分享一下怎麼解決這些問題

--