原文：
Specifications and details of AMD’s Upcoming Polaris 11 and Polaris 10 based
graphics cards have leaked onto the internet, and show that the upcoming
Radeon GPU’s are not only going to be extremely powerful efficient, but
quite the performance monsters to boot.
As is par for the course as a product gets closer to launch, rumors become
less wishy-washy and have a great deal more substance behind them. We’ve
heard time and time again that Polaris will be made using 14nm FinFet
process, drastically increasing its performance per watt, but what does that
actually mean for the hardware?
不負責任評論：
反正就是說從R9 390 390X的 28nm 一口氣進步到14nm
能夠大幅度提升能耗比
Tackling the AMD Polaris 10 (Ellesmere) range of cards first (the higher end
of the two), details from an engineering samples, labeled ’67DF:C4′ show
that the clock speed for the product range between 800mhz and 1050mhz.
Unsurprisingly, it’s still made on the same 14nm FinFet process, but more
solid details include:
2304 Stream Processors / cores, spread across 36 Compute Units. Though the
silicone itself allows for up to 2560 Stream Processors if all 40 Compute
Units are enabled. 67DF:C4 is indeed using a 256-bit memory controller, and
has a maximum memory configuration of 8GB GDDR5 or GDDR5X memory.
Finally, in regards to the clock speeds, while Polaris 10 is currently
reaching between 800-1050Mhz, it’s expected for this clock speed also to be
higher for final production cards, possibly hitting up to 1.15Ghz. The cards
TDP is impressive, operating at only 110-135 Watts… which is rather low.
不負責任評論：
時脈 800-1050mhz 2304Unified 256bit 8G DDR5或DDR5X
效能估計判斷在380X-390之間
不過有提到有可能是2560Unified 那就會在390和390X之間了
至於加上可超頻性 或許幹掉390X也不是夢
不過這樣的效能只有110W-135W真的是很厲害就是了
AMD也宣稱不會超過175W
至於FuryX應該還是旗艦才對
然後Pro Duo連菊花都還沒看到一片
不過聽說是要賣惹拉
功耗很神奇的只有350W 3個8PIN
1499美金不含過海價
剩下的都是AMD的未來展望與PPT簡報惹
有興趣自己可以慢慢看
話說
以前AMD在做FX的時候PPT也是打的無敵厲害
說啥未來應用的趨勢一定會轉向多線程應用 這只是時間問題而已
我們der推土機一定會引領業界邁向未來拔剌拔剌
我看
還是
吃土雞吧
http://imgur.com/T1RjQBZ
原文網址：
http://goo.gl/KwLmcZ
--
CPU：AMD FX9590 4.8GHZ (FAN:LEPA EXllusion 240)
RAM:HyperX Savage 1866 CL9-11-12-30 8GX4
MB:ASUS M5A99FX PRO R2.0
VGA:R9 290 X2 CF (ClockOC 1100mhz Memory1400mhz)
Power:COUGAR GX1050W
HDD:Toshiba Q300 Pro 128G / Ezlink T34 128G / Seagate 500G 7200rpm
--
Specifications and details of AMD’s Upcoming Polaris 11 and Polaris 10 based
graphics cards have leaked onto the internet, and show that the upcoming
Radeon GPU’s are not only going to be extremely powerful efficient, but
quite the performance monsters to boot.
As is par for the course as a product gets closer to launch, rumors become
less wishy-washy and have a great deal more substance behind them. We’ve
heard time and time again that Polaris will be made using 14nm FinFet
process, drastically increasing its performance per watt, but what does that
actually mean for the hardware?
不負責任評論：
反正就是說從R9 390 390X的 28nm 一口氣進步到14nm
能夠大幅度提升能耗比
Tackling the AMD Polaris 10 (Ellesmere) range of cards first (the higher end
of the two), details from an engineering samples, labeled ’67DF:C4′ show
that the clock speed for the product range between 800mhz and 1050mhz.
Unsurprisingly, it’s still made on the same 14nm FinFet process, but more
solid details include:
2304 Stream Processors / cores, spread across 36 Compute Units. Though the
silicone itself allows for up to 2560 Stream Processors if all 40 Compute
Units are enabled. 67DF:C4 is indeed using a 256-bit memory controller, and
has a maximum memory configuration of 8GB GDDR5 or GDDR5X memory.
Finally, in regards to the clock speeds, while Polaris 10 is currently
reaching between 800-1050Mhz, it’s expected for this clock speed also to be
higher for final production cards, possibly hitting up to 1.15Ghz. The cards
TDP is impressive, operating at only 110-135 Watts… which is rather low.
不負責任評論：
時脈 800-1050mhz 2304Unified 256bit 8G DDR5或DDR5X
效能估計判斷在380X-390之間
不過有提到有可能是2560Unified 那就會在390和390X之間了
至於加上可超頻性 或許幹掉390X也不是夢
不過這樣的效能只有110W-135W真的是很厲害就是了
AMD也宣稱不會超過175W
至於FuryX應該還是旗艦才對
然後Pro Duo連菊花都還沒看到一片
不過聽說是要賣惹拉
功耗很神奇的只有350W 3個8PIN
1499美金不含過海價
剩下的都是AMD的未來展望與PPT簡報惹
有興趣自己可以慢慢看
話說
以前AMD在做FX的時候PPT也是打的無敵厲害
說啥未來應用的趨勢一定會轉向多線程應用 這只是時間問題而已
我們der推土機一定會引領業界邁向未來拔剌拔剌
我看
還是
吃土雞吧
http://imgur.com/T1RjQBZ
原文網址：
http://goo.gl/KwLmcZ
--
CPU：AMD FX9590 4.8GHZ (FAN:LEPA EXllusion 240)
RAM:HyperX Savage 1866 CL9-11-12-30 8GX4
MB:ASUS M5A99FX PRO R2.0
VGA:R9 290 X2 CF (ClockOC 1100mhz Memory1400mhz)
Power:COUGAR GX1050W
HDD:Toshiba Q300 Pro 128G / Ezlink T34 128G / Seagate 500G 7200rpm
--
All Comments