http://www.crucial.com/support/firmware.aspx
Version: 0309
Release Date: 01/13/2012
Change Log:
‧Changes made in version 0002 (m4 can be updated to revision 0309 directly
from either revision 0001, 0002, or 0009)
‧Correct a condition where an incorrect response to a SMART counter will
cause the m4 drive to become unresponsive after 5184 hours of Power-on time.
The drive will recover after a power cycle, however, this failure will
repeat once per hour after reaching this point. The condition will allow
the end user to successfully update firmware, and poses no risk to user or
system data stored on the drive.
This firmware update is STRONGLY RECOMMENDED for drives in the field.
Although the failure mode due to the SMART Power On Hours counter poses
no risk to saved user data, the failure mode can become repetitive, and
pose a nuisance to the end user. If the end user has not yet observed
this failure mode, this update is required to prevent it from happening.
If you are using a SAS Expander please do not download this Firmware.
As soon as we have a Firmware Update that will work in these applications
we will release it.
修復 5184 小時後開始 BSoD 的問題，就算目前沒問題的 user 一樣要 update。
--
還好我只有兩顆 128G 要刷。 >"<
--
Version: 0309
Release Date: 01/13/2012
Change Log:
‧Changes made in version 0002 (m4 can be updated to revision 0309 directly
from either revision 0001, 0002, or 0009)
‧Correct a condition where an incorrect response to a SMART counter will
cause the m4 drive to become unresponsive after 5184 hours of Power-on time.
The drive will recover after a power cycle, however, this failure will
repeat once per hour after reaching this point. The condition will allow
the end user to successfully update firmware, and poses no risk to user or
system data stored on the drive.
This firmware update is STRONGLY RECOMMENDED for drives in the field.
Although the failure mode due to the SMART Power On Hours counter poses
no risk to saved user data, the failure mode can become repetitive, and
pose a nuisance to the end user. If the end user has not yet observed
this failure mode, this update is required to prevent it from happening.
If you are using a SAS Expander please do not download this Firmware.
As soon as we have a Firmware Update that will work in these applications
we will release it.
修復 5184 小時後開始 BSoD 的問題，就算目前沒問題的 user 一樣要 update。
--
還好我只有兩顆 128G 要刷。 >"<
--
All Comments