snmp 執行後snmpwalk 一直 Timeout - BBS
By Leila
at 2005-09-27T10:55
at 2005-09-27T10:55
Table of Contents
最下面我有附上安裝後提示大大可以參考
這二天在安裝這個東西
不過我一直有疑惑的是
到底他的設定檔是要再
/etc/snmp
/usr/local/etc/snmp
/var/snmp
到底是哪一個
我有直接使用 snmpconf 這一個工具去生成 snmp.conf 檔
不過往往啟動正常 不過接下來就有問題
訊息如下:
root [/var/net-snmp] # /usr/local/etc/rc.d/snmpd.sh restart
snmpd not running? (check /var/run/snmpd.pid).
Starting snmpd.
root [/var/net-snmp] # snmpwalk -c public -v 1 localhost
Timeout: No Response from localhost
root [/var/net-snmp] #
當然我也有試過 用 -t 將時間延長
不過都沒有用 我已經 -t 120也是沒有用 還是一樣
Timeout: No Response from localhost
所以我想問問前輩 有沒有什麼指點的方法
若是需要的話 我在貼出我的 snmpd.conf
****************************************************************************
* 安 裝 後 說 明 *
****************************************************************************
**** This port installs snmp daemon, header files and libraries but don't
invokes snmpd by default.
If you want to invoke snmpd and/or snmptrapd at startup, put these
lines into /etc/rc.conf.
snmpd_enable="YES"
snmpd_flags="-a -p /var/run/snmpd.pid"
snmptrapd_enable="YES"
snmptrapd_flags="-a -p /var/run/snmptrapd.pid"
**** You may specify the following make variables:
NET_SNMP_SYS_CONTACT="[email protected]"
NET_SNMP_SYS_LOCATION="Tokyo, Japan"
DEFAULT_SNMP_VERSION=3
NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio"
NET_SNMP_LOGFILE=/var/log/snmpd.log
NET_SNMP_PERSISTENTDIR=/var/net-snmp
to define default values (or overwriting defaults). At least
setting first two variables, you will not be prompted during
configuration process. You may also set
BATCH="yes"
to avoid interactive configuration.
===> Compressing manual pages for net-snmp-5.2.1.2
===> Running ldconfig
/sbin/ldconfig -m /usr/local/lib
===> Registering installation for net-snmp-5.2.1.2
===> SECURITY REPORT:
This port has installed the following files which may act as network
servers and may therefore pose a remote security risk to the system.
/usr/local/lib/libnetsnmp.so.7
/usr/local/lib/libnetsnmpmibs.so.7
This port has installed the following startup scripts which may cause
these network services to be started at boot time.
/usr/local/etc/rc.d/snmptrapd.sh
/usr/local/etc/rc.d/snmpd.sh
If there are vulnerabilities in these programs there may be a security
risk to the system. FreeBSD makes no guarantee about the security of
ports included in the Ports Collection. Please type 'make deinstall'
to deinstall the port if this is a concern.
For more information, and contact details about the security
status of this software, see the following webpage:
http://net-snmp.sourceforge.net/
467.173u 162.271s 11:34.03 90.6% 1134+1816k 2350+318io 1080pf+0w
--
分享讓你我都可以享受到資源
http://holyhigh.org/ 讓我們一同喜愛這貼圖空間
喜歡他的話 別忘了推薦給大家...
--
這二天在安裝這個東西
不過我一直有疑惑的是
到底他的設定檔是要再
/etc/snmp
/usr/local/etc/snmp
/var/snmp
到底是哪一個
我有直接使用 snmpconf 這一個工具去生成 snmp.conf 檔
不過往往啟動正常 不過接下來就有問題
訊息如下:
root [/var/net-snmp] # /usr/local/etc/rc.d/snmpd.sh restart
snmpd not running? (check /var/run/snmpd.pid).
Starting snmpd.
root [/var/net-snmp] # snmpwalk -c public -v 1 localhost
Timeout: No Response from localhost
root [/var/net-snmp] #
當然我也有試過 用 -t 將時間延長
不過都沒有用 我已經 -t 120也是沒有用 還是一樣
Timeout: No Response from localhost
所以我想問問前輩 有沒有什麼指點的方法
若是需要的話 我在貼出我的 snmpd.conf
****************************************************************************
* 安 裝 後 說 明 *
****************************************************************************
**** This port installs snmp daemon, header files and libraries but don't
invokes snmpd by default.
If you want to invoke snmpd and/or snmptrapd at startup, put these
lines into /etc/rc.conf.
snmpd_enable="YES"
snmpd_flags="-a -p /var/run/snmpd.pid"
snmptrapd_enable="YES"
snmptrapd_flags="-a -p /var/run/snmptrapd.pid"
**** You may specify the following make variables:
NET_SNMP_SYS_CONTACT="[email protected]"
NET_SNMP_SYS_LOCATION="Tokyo, Japan"
DEFAULT_SNMP_VERSION=3
NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio"
NET_SNMP_LOGFILE=/var/log/snmpd.log
NET_SNMP_PERSISTENTDIR=/var/net-snmp
to define default values (or overwriting defaults). At least
setting first two variables, you will not be prompted during
configuration process. You may also set
BATCH="yes"
to avoid interactive configuration.
===> Compressing manual pages for net-snmp-5.2.1.2
===> Running ldconfig
/sbin/ldconfig -m /usr/local/lib
===> Registering installation for net-snmp-5.2.1.2
===> SECURITY REPORT:
This port has installed the following files which may act as network
servers and may therefore pose a remote security risk to the system.
/usr/local/lib/libnetsnmp.so.7
/usr/local/lib/libnetsnmpmibs.so.7
This port has installed the following startup scripts which may cause
these network services to be started at boot time.
/usr/local/etc/rc.d/snmptrapd.sh
/usr/local/etc/rc.d/snmpd.sh
If there are vulnerabilities in these programs there may be a security
risk to the system. FreeBSD makes no guarantee about the security of
ports included in the Ports Collection. Please type 'make deinstall'
to deinstall the port if this is a concern.
For more information, and contact details about the security
status of this software, see the following webpage:
http://net-snmp.sourceforge.net/
467.173u 162.271s 11:34.03 90.6% 1134+1816k 2350+318io 1080pf+0w
--
分享讓你我都可以享受到資源
http://holyhigh.org/ 讓我們一同喜愛這貼圖空間
喜歡他的話 別忘了推薦給大家...
--
Tags:
BBS
All Comments
Related Posts
重開機後
By Hedwig
at 2005-09-27T01:16
at 2005-09-27T01:16
安裝x window(xorg)的問題
By Iris
at 2005-09-26T21:46
at 2005-09-26T21:46
samba 3.0.20
By Sierra Rose
at 2005-09-26T12:22
at 2005-09-26T12:22
cacti執行之後 tmp 出現大量紀錄檔如何解決?
By William
at 2005-09-26T01:40
at 2005-09-26T01:40
關於mknod
By Isla
at 2005-09-25T23:15
at 2005-09-25T23:15