/var/log/messages一堆硬碟的error - Linux

By Charlotte
at 2012-04-11T17:19
at 2012-04-11T17:19
Table of Contents
感謝各位的建議
剛補安裝了smartmontools
用smartclt檢視第一顆是正常的(順便把SMART打開)
但檢視第二顆卻出現以下的訊息:
# smartctl -i /dev/sdb -T permissive
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Device: /5:0:0:0 Version:
scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46
兩顆硬碟沒做Raid
也應該不是主機板chipset的問題(因為第一顆很正常)
另外想請教我對第一顆硬碟啟動SMART是下:
# smarlctl -s on /dev/sda
但看了一下網路上的文章大多是用:
# smartctl -s on -S on -o on /dev/sda
但我去看了/etc/smartd.conf設定檔中
在每日自我檢查時就會下-S on和 -o on
所以有必要自己啟動SMART時就先下這兩個參數嗎?
感謝
※ 引述《LokiCjn (我的征途是星之海)》之銘言:
: OS是CentOS 6.2 x64
: 硬碟是WD AAKX 500G
: 最近我備份用的硬碟一直出現以下的錯誤訊息
: Buffer I/O error on device sdb1, logical block 68415940
: lost page write due to I/O error on sdb1
: Buffer I/O error on device sdb1, logical block 68415941
: lost page write due to I/O error on sdb1
: ata6: EH complete
: ata6.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
: ata6.00: BMDMA stat 0x26
: ata6.00: SError: { UnrecovData Handshk }
: ata6.00: failed command: WRITE DMA EXT
: ata6.00: cmd 35/00:00:1f:92:9f/00:04:20:00:00/e0 tag 0 dma 524288 out
: res 51/84:80:1f:92:9f/84:03:20:00:00/e0 Emask 0x30 (host bus error)
: ata6.00: status: { DRDY ERR }
: ata6.00: error: { ICRC ABRT }
: ata6.00: hard resetting link
: ata6.01: hard resetting link
: 有試過將kernel版本更新並跑了一次e2fsck還是同樣的結果
: 不知是主機板、排線還是硬碟快掛了
: 請問有人遇到類似的狀況嗎?
: 應該要如何去比較好?感謝
--
剛補安裝了smartmontools
用smartclt檢視第一顆是正常的(順便把SMART打開)
但檢視第二顆卻出現以下的訊息:
# smartctl -i /dev/sdb -T permissive
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Device: /5:0:0:0 Version:
scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46
兩顆硬碟沒做Raid
也應該不是主機板chipset的問題(因為第一顆很正常)
另外想請教我對第一顆硬碟啟動SMART是下:
# smarlctl -s on /dev/sda
但看了一下網路上的文章大多是用:
# smartctl -s on -S on -o on /dev/sda
但我去看了/etc/smartd.conf設定檔中
在每日自我檢查時就會下-S on和 -o on
所以有必要自己啟動SMART時就先下這兩個參數嗎?
感謝
※ 引述《LokiCjn (我的征途是星之海)》之銘言:
: OS是CentOS 6.2 x64
: 硬碟是WD AAKX 500G
: 最近我備份用的硬碟一直出現以下的錯誤訊息
: Buffer I/O error on device sdb1, logical block 68415940
: lost page write due to I/O error on sdb1
: Buffer I/O error on device sdb1, logical block 68415941
: lost page write due to I/O error on sdb1
: ata6: EH complete
: ata6.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
: ata6.00: BMDMA stat 0x26
: ata6.00: SError: { UnrecovData Handshk }
: ata6.00: failed command: WRITE DMA EXT
: ata6.00: cmd 35/00:00:1f:92:9f/00:04:20:00:00/e0 tag 0 dma 524288 out
: res 51/84:80:1f:92:9f/84:03:20:00:00/e0 Emask 0x30 (host bus error)
: ata6.00: status: { DRDY ERR }
: ata6.00: error: { ICRC ABRT }
: ata6.00: hard resetting link
: ata6.01: hard resetting link
: 有試過將kernel版本更新並跑了一次e2fsck還是同樣的結果
: 不知是主機板、排線還是硬碟快掛了
: 請問有人遇到類似的狀況嗎?
: 應該要如何去比較好?感謝
--
Tags:
Linux
All Comments

By Ivy
at 2012-04-13T07:59
at 2012-04-13T07:59
Related Posts
有人opera下用gcin正常的嗎?

By Tracy
at 2012-04-11T15:45
at 2012-04-11T15:45
請教該如何將build的檔案自chroot取出 ..

By Heather
at 2012-04-11T15:40
at 2012-04-11T15:40
在ubuntu下安裝物理軟體ROOT遇到問題

By Franklin
at 2012-04-10T23:02
at 2012-04-10T23:02
tarbomb

By Jake
at 2012-04-10T16:08
at 2012-04-10T16:08
檔案部分內容移到另一個檔案裡

By Andy
at 2012-04-10T13:04
at 2012-04-10T13:04