隔壁板友求檔
幫估狗到SHARP SH930W同型號貼牌機Vizio VP800的ROM
順便上傳貼上來給有需要的人
---
ROM Mobile Vizio VP800– ROM Android 4.1.1
Official ROM Vizio VP800 version: 7136_1_33N
Gapps include - No Rooted
Language support : Multilang
http://sync.hamicloud.net/_oops/zzzz/gqx
---
Install ROM : (If you use Recovery in the ROM Run→打开我.bat→
Enter the number 1 and press enter automatically into the RECOVERY)
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button
until the robot icon appear, then press power button again and
it will show as below
3.Press the volume- to move up and down to choose "wipe data/factory reset",
then press volume+ button to confirm.
4.Choose "yes-delete all user data",then press volume+ button to enter
the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose "apply update from sdcard"
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading.
It will showed as below when the upgrading finished.
9.Choose "reboot system now",
then press volume+ button to reboot your phone.
--
我SH930W能用沒測試
麻煩有刷的板友回報
--
幫估狗到SHARP SH930W同型號貼牌機Vizio VP800的ROM
順便上傳貼上來給有需要的人
---
ROM Mobile Vizio VP800– ROM Android 4.1.1
Official ROM Vizio VP800 version: 7136_1_33N
Gapps include - No Rooted
Language support : Multilang
http://sync.hamicloud.net/_oops/zzzz/gqx
---
Install ROM : (If you use Recovery in the ROM Run→打开我.bat→
Enter the number 1 and press enter automatically into the RECOVERY)
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button
until the robot icon appear, then press power button again and
it will show as below
3.Press the volume- to move up and down to choose "wipe data/factory reset",
then press volume+ button to confirm.
4.Choose "yes-delete all user data",then press volume+ button to enter
the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose "apply update from sdcard"
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading.
It will showed as below when the upgrading finished.
9.Choose "reboot system now",
then press volume+ button to reboot your phone.
--
我SH930W能用沒測試
麻煩有刷的板友回報
--
All Comments