VPN - BBS
By Anthony
at 2006-08-06T16:09
at 2006-08-06T16:09
Table of Contents
※ 引述《[email protected] (機車....)》之銘言:
: ※ 引述《[email protected] (FreeBSD 我來拉!!!!)》之銘言:
: > 小弟安裝的是mpd
: > 是照著http://0rz.net/d11Fa網站一步一步做的
: > 不過就是連不上(出現正在確認使用者名稱和密碼就停住了)
: > 看了log檔
: > 也只寫
: > newsyslog[601]: logfile turned over
: > 就這樣而已@@
: > 想請問到底是什麼問題呢?
: > ps:學校很龜毛...關了不少port...好不容易申請到打開port 1723結果還是弄不好@@
: > 難道是還需要開其他port?
: 不要用 /usr/local/etc/rc.d/mpd.sh start 啟動
: 直接在 command line 打 mpd 再撥一次, 然後看 log
cmu-dh[/var/log]-root->mpd
Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 1523, version 3.18 (root@******.*****.*** 15:03 6-Aug-2006)
[pptp1] ppp node is "mpd1523-pptp1"
mpd: local IP address for PPTP is ***.***.**.***
[pptp1] using interface ng0
[pptp2] ppp node is "mpd1523-pptp2"
[pptp2] using interface ng1
[pptp3] ppp node is "mpd1523-pptp3"
[pptp3] using interface ng2
[pptp4] ppp node is "mpd1523-pptp4"
[pptp4] using interface ng3
[pptp5] ppp node is "mpd1523-pptp5"
[pptp5] using interface ng4
[pptp5:pptp5] mpd: PPTP connection from ***.***.***.**:****
pptp0: attached to connection with ***.***.***.**:****
[pptp1] IFACE: Open event
[pptp1] IPCP: Open event
[pptp1] IPCP: state change Initial --> Starting
[pptp1] IPCP: LayerStart
[pptp1] IPCP: Open event
[pptp1] bundle: OPEN event in state CLOSED
[pptp1] opening link "pptp1"...
[pptp1] link: OPEN event
[pptp1] LCP: Open event
[pptp1] LCP: state change Initial --> Starting
[pptp1] LCP: LayerStart
[pptp1] device: OPEN event in state DOWN
[pptp1] attaching to peer's outgoing call
[pptp1] device is now in state OPENING
[pptp1] device: UP event in state OPENING
[pptp1] device is now in state UP
[pptp1] link: UP event
[pptp1] link: origination is remote
[pptp1] LCP: Up event
[pptp1] LCP: state change Starting --> Req-Sent
[pptp1] LCP: phase shift DEAD --> ESTABLISH
[pptp1] LCP: SendConfigReq #1
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
pptp0-0: ignoring SetLinkInfo
[pptp1] LCP: SendConfigReq #2
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #3
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
pptp0-0: ignoring SetLinkInfo
[pptp1] LCP: SendConfigReq #4
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #5
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #6
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #7
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
pptp0-0: call cleared by peer
pptp0-0: killing channel
[pptp1] PPTP call terminated
[pptp1] IFACE: Close event
[pptp1] IPCP: Close event
[pptp1] IPCP: state change Starting --> Initial
[pptp1] IPCP: LayerFinish
[pptp1] IFACE: Close event
pptp0: closing connection with ***.***.***.**:****
[pptp1] bundle: CLOSE event in state OPENED
[pptp1] closing link "pptp1"...
[pptp1] device: DOWN event in state UP
[pptp1] device is now in state DOWN
[pptp1] link: CLOSE event
[pptp1] LCP: Close event
[pptp1] LCP: state change Req-Sent --> Closing
[pptp1] LCP: phase shift ESTABLISH --> TERMINATE
[pptp1] LCP: SendTerminateReq #8
[pptp1] error writing len 8 frame to bypass: Network is down
[pptp1] link: DOWN event
[pptp1] LCP: Down event
[pptp1] LCP: LayerFinish
[pptp1] LCP: state change Closing --> Initial
[pptp1] LCP: phase shift TERMINATE --> DEAD
[pptp1] device: CLOSE event in state DOWN
[pptp1] device is now in state DOWN
pptp0: killing connection with ***.***.***.***:***
--
既然你都誠心誠意的問了 我就大發慈悲的告訴你
為了防止世界被破壞 為了保護世界的和平
貫徹愛與真實的邪惡 可愛又迷人的反派角色
武藏~~小次郎~~~ 我們是穿梭在銀河的火箭隊
白洞~~~白色的明天正等著我們呢~~ 就是這樣~~~~喵~~~~
http://www.pixnet.net/chrissim so la s ~~~~
--
: ※ 引述《[email protected] (FreeBSD 我來拉!!!!)》之銘言:
: > 小弟安裝的是mpd
: > 是照著http://0rz.net/d11Fa網站一步一步做的
: > 不過就是連不上(出現正在確認使用者名稱和密碼就停住了)
: > 看了log檔
: > 也只寫
: > newsyslog[601]: logfile turned over
: > 就這樣而已@@
: > 想請問到底是什麼問題呢?
: > ps:學校很龜毛...關了不少port...好不容易申請到打開port 1723結果還是弄不好@@
: > 難道是還需要開其他port?
: 不要用 /usr/local/etc/rc.d/mpd.sh start 啟動
: 直接在 command line 打 mpd 再撥一次, 然後看 log
cmu-dh[/var/log]-root->mpd
Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 1523, version 3.18 (root@******.*****.*** 15:03 6-Aug-2006)
[pptp1] ppp node is "mpd1523-pptp1"
mpd: local IP address for PPTP is ***.***.**.***
[pptp1] using interface ng0
[pptp2] ppp node is "mpd1523-pptp2"
[pptp2] using interface ng1
[pptp3] ppp node is "mpd1523-pptp3"
[pptp3] using interface ng2
[pptp4] ppp node is "mpd1523-pptp4"
[pptp4] using interface ng3
[pptp5] ppp node is "mpd1523-pptp5"
[pptp5] using interface ng4
[pptp5:pptp5] mpd: PPTP connection from ***.***.***.**:****
pptp0: attached to connection with ***.***.***.**:****
[pptp1] IFACE: Open event
[pptp1] IPCP: Open event
[pptp1] IPCP: state change Initial --> Starting
[pptp1] IPCP: LayerStart
[pptp1] IPCP: Open event
[pptp1] bundle: OPEN event in state CLOSED
[pptp1] opening link "pptp1"...
[pptp1] link: OPEN event
[pptp1] LCP: Open event
[pptp1] LCP: state change Initial --> Starting
[pptp1] LCP: LayerStart
[pptp1] device: OPEN event in state DOWN
[pptp1] attaching to peer's outgoing call
[pptp1] device is now in state OPENING
[pptp1] device: UP event in state OPENING
[pptp1] device is now in state UP
[pptp1] link: UP event
[pptp1] link: origination is remote
[pptp1] LCP: Up event
[pptp1] LCP: state change Starting --> Req-Sent
[pptp1] LCP: phase shift DEAD --> ESTABLISH
[pptp1] LCP: SendConfigReq #1
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
pptp0-0: ignoring SetLinkInfo
[pptp1] LCP: SendConfigReq #2
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #3
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
pptp0-0: ignoring SetLinkInfo
[pptp1] LCP: SendConfigReq #4
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #5
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #6
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
[pptp1] LCP: SendConfigReq #7
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM 1d5f8342
AUTHPROTO PAP
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 11 2f 6f 32 89
pptp0-0: call cleared by peer
pptp0-0: killing channel
[pptp1] PPTP call terminated
[pptp1] IFACE: Close event
[pptp1] IPCP: Close event
[pptp1] IPCP: state change Starting --> Initial
[pptp1] IPCP: LayerFinish
[pptp1] IFACE: Close event
pptp0: closing connection with ***.***.***.**:****
[pptp1] bundle: CLOSE event in state OPENED
[pptp1] closing link "pptp1"...
[pptp1] device: DOWN event in state UP
[pptp1] device is now in state DOWN
[pptp1] link: CLOSE event
[pptp1] LCP: Close event
[pptp1] LCP: state change Req-Sent --> Closing
[pptp1] LCP: phase shift ESTABLISH --> TERMINATE
[pptp1] LCP: SendTerminateReq #8
[pptp1] error writing len 8 frame to bypass: Network is down
[pptp1] link: DOWN event
[pptp1] LCP: Down event
[pptp1] LCP: LayerFinish
[pptp1] LCP: state change Closing --> Initial
[pptp1] LCP: phase shift TERMINATE --> DEAD
[pptp1] device: CLOSE event in state DOWN
[pptp1] device is now in state DOWN
pptp0: killing connection with ***.***.***.***:***
--
既然你都誠心誠意的問了 我就大發慈悲的告訴你
為了防止世界被破壞 為了保護世界的和平
貫徹愛與真實的邪惡 可愛又迷人的反派角色
武藏~~小次郎~~~ 我們是穿梭在銀河的火箭隊
白洞~~~白色的明天正等著我們呢~~ 就是這樣~~~~喵~~~~
http://www.pixnet.net/chrissim so la s ~~~~
--
Tags:
BBS
All Comments
Related Posts
VPN
By Thomas
at 2006-08-06T01:49
at 2006-08-06T01:49
Re: 如何將MYSQL 4.1 改裝成 MYSQL 3.23
By Ethan
at 2006-08-04T21:52
at 2006-08-04T21:52
Apache大量送出封包,沒有log怎麼辦?
By Bethany
at 2006-08-04T17:20
at 2006-08-04T17:20
Re: 如何將MYSQL 4.1 改裝成 MYSQL 3.23
By Skylar DavisLinda
at 2006-08-04T14:41
at 2006-08-04T14:41
Apache大量送出封包,沒有log怎麼辦?
By Rae
at 2006-08-03T01:11
at 2006-08-03T01:11