最近win 7開機會出一個黑畫面,內容如下:
Checking file system on C:
The type of the file system is NTFS.
Volume label is (亂碼).
One of your disks needs to be checked for consistency.
You may cancel the disk check,but it is strongly recommended
that you continue.
差不多等個9秒後,就會再接著出現以下的內容
Cannot open volume for direct access.
Autochk cannot run due to an error caused by a recently installed software
package.
Use the system restore feature from the control panel to restore the system
to a point prior to the recent software package installation.
以上顯示完畢後,就可以正常進入作業系統,使用電腦~
目前已使用過磁碟重組和檢查,硬碟並無發現任何問題
以上內容每次開機都會再出現,造成困擾！ 希望大家可以幫忙解決！Thanks！
--
Checking file system on C:
The type of the file system is NTFS.
Volume label is (亂碼).
One of your disks needs to be checked for consistency.
You may cancel the disk check,but it is strongly recommended
that you continue.
差不多等個9秒後,就會再接著出現以下的內容
Cannot open volume for direct access.
Autochk cannot run due to an error caused by a recently installed software
package.
Use the system restore feature from the control panel to restore the system
to a point prior to the recent software package installation.
以上顯示完畢後,就可以正常進入作業系統,使用電腦~
目前已使用過磁碟重組和檢查,硬碟並無發現任何問題
以上內容每次開機都會再出現,造成困擾！ 希望大家可以幫忙解決！Thanks！
--
All Comments