動態硬碟 離線 - 儲存設備

By Bethany
at 2010-11-01T23:32
at 2010-11-01T23:32
Table of Contents
※ 引述《ericabab (ㄍㄠˊ)》之銘言:
: 標題: Re: [救援] 動態硬碟 離線
: 時間: Fri Feb 29 07:45:12 2008
:
: ※ 引述《hxcxw (way..away)》之銘言:
: : ※ 引述《KAKA83 (苦惱過活中~)》之銘言:
: : : 有關這樣問題的回答
: : : 請用辜狗大大搜尋以下字串WindowsXP-KB838079-SupportTools-ENU.exe
: : : 下載這個程式安裝後
: : : 使用裡面的DSKPROBE.EXE
: : : HOWTO: Convert a dynamic disk back to a basic disk without data loss
: : : Posted By: o2
: : : **Disclaimer: This ONLY works if you have NOT used ANY of the "new" features
: : : of dynamic disks such as extending a partition or software RAID.
: : : This is an expert-level procedure, so if you don't know what you are doing,
: : : you shouldn't be attempting this.**
: : : 1) Install dskprobe.exe on the system. (This is one of the utilities in the
: : : Windows 2000 support tools on the install CD, and can be installed by
: : : simply copying the .exe file to the hard drive.)
: : : 2) Run dskprobe.exe on the system.
: : : 3) Select the Drives menu and "Physical Drive. . ."
: : : 4) Double click on the drive that you want to convert back to a basic disk.
: : : (以上是指你硬碟裡面有分割過的話~第一個硬碟就是在01C0這個欄位~
: : : 以此類推~通通都要修改成07)
: : : Special thanks go to svdsinner!
: : 拜託救我吧.......我照上一篇的內容去試
: : 結果是就回來了沒錯...可是只有一個槽...囧(應該還有3個吧....)
: : 哪我就在01DO.01E0.01F0這3行的第3欄(本來是00..改成07)
: : 不改還好...1改WINDOWS跑到一半就跑藍色畫面了...囧
: : 還好...再去SPFDISK改回來00就行了...
: : 哪這樣到底是要怎麼把剩下的3個槽搞出來咧...
: : 我在想是不是要把01CO的4.5.6欄位本來是寫FE也改成07嗎?
: : 實在是沒種直接改...所以先問一下各位該怎辦才好
: : 裡面有我的論文資料耶..雖然已經畢業了..
: : 不過還是想要保存下來(都一直忘記燒出來)
: : 拜託各位回答了...
日前我的電腦重灌XP後,發現有一顆硬碟變成動態硬碟,
完全讀不到硬碟資料,參考很多人的方法試圖轉換成基本硬碟,
最後使用上面的方法後,硬碟是出現了,
但是跟上面的情形一樣,只出現一個磁碟分割,
原本應該有三個的,同樣找了很多輔助程式(Final data...),一樣沒有幫助,
硬碟裡面有很多照片,是我的回憶照片,
想請問板上的各位,有甚麼方法可以把剩餘的磁碟槽找出來,
拜託大家了...
--
: 標題: Re: [救援] 動態硬碟 離線
: 時間: Fri Feb 29 07:45:12 2008
:
: ※ 引述《hxcxw (way..away)》之銘言:
: : ※ 引述《KAKA83 (苦惱過活中~)》之銘言:
: : : 有關這樣問題的回答
: : : 請用辜狗大大搜尋以下字串WindowsXP-KB838079-SupportTools-ENU.exe
: : : 下載這個程式安裝後
: : : 使用裡面的DSKPROBE.EXE
: : : HOWTO: Convert a dynamic disk back to a basic disk without data loss
: : : Posted By: o2
: : : **Disclaimer: This ONLY works if you have NOT used ANY of the "new" features
: : : of dynamic disks such as extending a partition or software RAID.
: : : This is an expert-level procedure, so if you don't know what you are doing,
: : : you shouldn't be attempting this.**
: : : 1) Install dskprobe.exe on the system. (This is one of the utilities in the
: : : Windows 2000 support tools on the install CD, and can be installed by
: : : simply copying the .exe file to the hard drive.)
: : : 2) Run dskprobe.exe on the system.
: : : 3) Select the Drives menu and "Physical Drive. . ."
: : : 4) Double click on the drive that you want to convert back to a basic disk.
: : : (以上是指你硬碟裡面有分割過的話~第一個硬碟就是在01C0這個欄位~
: : : 以此類推~通通都要修改成07)
: : : Special thanks go to svdsinner!
: : 拜託救我吧.......我照上一篇的內容去試
: : 結果是就回來了沒錯...可是只有一個槽...囧(應該還有3個吧....)
: : 哪我就在01DO.01E0.01F0這3行的第3欄(本來是00..改成07)
: : 不改還好...1改WINDOWS跑到一半就跑藍色畫面了...囧
: : 還好...再去SPFDISK改回來00就行了...
: : 哪這樣到底是要怎麼把剩下的3個槽搞出來咧...
: : 我在想是不是要把01CO的4.5.6欄位本來是寫FE也改成07嗎?
: : 實在是沒種直接改...所以先問一下各位該怎辦才好
: : 裡面有我的論文資料耶..雖然已經畢業了..
: : 不過還是想要保存下來(都一直忘記燒出來)
: : 拜託各位回答了...
日前我的電腦重灌XP後,發現有一顆硬碟變成動態硬碟,
完全讀不到硬碟資料,參考很多人的方法試圖轉換成基本硬碟,
最後使用上面的方法後,硬碟是出現了,
但是跟上面的情形一樣,只出現一個磁碟分割,
原本應該有三個的,同樣找了很多輔助程式(Final data...),一樣沒有幫助,
硬碟裡面有很多照片,是我的回憶照片,
想請問板上的各位,有甚麼方法可以把剩餘的磁碟槽找出來,
拜託大家了...
--
Tags:
儲存設備
All Comments

By Olga
at 2010-11-02T20:16
at 2010-11-02T20:16
Related Posts
[救援] 壞軌硬碟

By Genevieve
at 2010-11-01T22:45
at 2010-11-01T22:45
不小心刪除了磁碟分割

By Rebecca
at 2010-11-01T22:43
at 2010-11-01T22:43
640G AAKS x2 raid0 > 1T SATA3 ? 系統 …

By Charlotte
at 2010-11-01T22:25
at 2010-11-01T22:25
用Acronis True Image WD edition還原ꨠ…

By Charlie
at 2010-11-01T21:59
at 2010-11-01T21:59
行動硬碟

By Hedy
at 2010-11-01T20:02
at 2010-11-01T20:02