http://www.guru3d.com/news-story/gigabyte-pushing-it-a-motherboard-revision-too-far.html
[內文]
After some comparisons the boards and indeed, revision 2.0 of the board have downgraded,one phase less, cheaper components.
After putting it to the test, it became apparent that the performance of that motherboard is slower as well.
It is mentioned that the Rev 1.0 B85M-HD3 motherboard does throttle back the CPU and measured MOSFET temperatures around 80°C during video transcoding.
Now, for revision 2.0 it takes merely 6 minutes before the board throttles the CPU back to 800MHz as MOSFET temperatures of 105 to 112°C have been reached due to the hardware differences.
技嘉改版的真相越來越清楚了
只是由國外媒體測出來真是丟盡台灣的臉
技嘉發言人要不要再出來澄清一下是國外媒體抹黑
--
[內文]
After some comparisons the boards and indeed, revision 2.0 of the board have downgraded,one phase less, cheaper components.
After putting it to the test, it became apparent that the performance of that motherboard is slower as well.
It is mentioned that the Rev 1.0 B85M-HD3 motherboard does throttle back the CPU and measured MOSFET temperatures around 80°C during video transcoding.
Now, for revision 2.0 it takes merely 6 minutes before the board throttles the CPU back to 800MHz as MOSFET temperatures of 105 to 112°C have been reached due to the hardware differences.
技嘉改版的真相越來越清楚了
只是由國外媒體測出來真是丟盡台灣的臉
技嘉發言人要不要再出來澄清一下是國外媒體抹黑
--
All Comments