新手Arc S降刷2.3.4版失敗 - Android

Table of Contents



更新後覺得還是2.3.4版最適合使用,

於是參照教學 http://www.mobile01.com/topicdetail.php?f=569&t=2705760&p=1

但是刷了好幾次都不成功,

能請大家幫忙看看步驟是否有誤嗎?



*************以下為flashtool信息***********


28/035/2013 20:35:42 - INFO - <- This level is successfully initialized
28/035/2013 20:35:42 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
28/035/2013 20:35:47 - INFO - Device disconnected
28/036/2013 20:36:48 - INFO - Selected ARC S / 4.0.2.A.0.42 / GPFmm222
28/036/2013 20:36:48 - INFO - Preparing files for flashing
28/036/2013 20:36:49 - INFO - Please connect your device into flashmode.
28/037/2013 20:37:01 - INFO - Device connected in flash mode
28/037/2013 20:37:02 - INFO - Opening device for R/W
28/037/2013 20:37:02 - INFO - Start Flashing
28/037/2013 20:37:02 - INFO - Processing loader
28/037/2013 20:37:02 - INFO - Checking header
28/037/2013 20:37:02 - INFO - Ending flash session
28/037/2013 20:37:02 - ERROR -
28/037/2013 20:37:02 - ERROR - Error flashing. Aborted
28/037/2013 20:37:02 - INFO - Device connected in flash mode
28/037/2013 20:37:52 - INFO - Device disconnected
28/038/2013 20:38:10 - INFO - Device connected with USB debugging off
28/038/2013 20:38:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
28/040/2013 20:40:33 - INFO - Device disconnected


*********************************************************


我按照教學, 下載了神腦版ftf,

教學裡提到ARC S不需解鎖也不用ROOT就能降刷, 就開心的跟著步驟照做.

安裝了Flashtool也更新了驅動程式, 但不知為何都無法成功.



大家都說SONY刷機容易, 但對新手來說真的很難阿~~

能夠幫忙看看哪個程序出錯了嗎? 非常謝謝!!










--

All Comments

Robert avatarRobert2013-07-02
message有寫啊...
Charlie avatarCharlie2013-07-03
be sure you are not in MTP mode
Doris avatarDoris2013-07-08
我有確認過了 沒有在MTP MODE, 我是在MSC MODE~
Oliver avatarOliver2013-07-11
這是關機刷嗎?
Faithe avatarFaithe2013-07-11
刷ftf檔不是要用fastboot嗎
Queena avatarQueena2013-07-14
呃應該是我記錯了哈哈
Harry avatarHarry2013-07-15
重新下載STOCK FTF看看 我之前刷失敗是檔案沒載好
Ingrid avatarIngrid2013-07-17
還有usb偵錯可能要開吧
Ivy avatarIvy2013-07-18
是flashmode沒錯,回到家測試了一下,他上面訊息果然是
開著機就想刷,完全搞錯方向
Jacob avatarJacob2013-07-22
to樓上,謝謝你幫忙測試,但我都是關機刷啊…
Andy avatarAndy2013-07-22
另外usb偵錯開或關都是一樣,我都試過囉
Andy avatarAndy2013-07-27
這樣很不合理,那些USB Debug, MTP都是開機後設定
Ula avatarUla2013-07-30
你有興趣的話打一下您自己的操作流程吧!寄來信箱也行
Emma avatarEmma2013-08-03
我猜你是最後一步,沒有按BACK就接電腦。
Joseph avatarJoseph2013-08-06
TO 樓上C大,後來我載了舊版的flashtool再刷一次,這次完
全沒問題,一次ok...不知道是不是新版flashtool的問題?
Genevieve avatarGenevieve2013-08-07
2.3.4 沒比較好用