有關SD卡掛載 - Linux

小弟最近想把相機照片備份到電腦裡
不過SD卡插入筆電內建的讀卡機後貌似沒有被認到
檔案總管的Device裡沒出現
有上網搜過關鍵字但還是沒解
筆電型號是ASUS A42Jv，系統：Linux Mint 16
有在網路上查到指令sudo lspci -vnn
列出PCI設備，跟SD卡有關的顯示如下

07:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2382] (rev 80)
Subsystem: ASUSTeK Computer Inc. Device [1043:1a07]
Physical Slot: 5
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d3805000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: sdhci-pci

07:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host
Controller [197b:2381] (rev 80) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:1a07]
Physical Slot: 5
Flags: fast devsel, IRQ 18
Memory at d3804000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-

也有網友說可以看dmesg裡面的訊息
不過我看了也是一頭霧水 QQ
顯示訊息如下

[ 1.747160] sdhci: Secure Digital Host Controller Interface driver
[ 1.747164] sdhci: Copyright(c) Pierre Ossman
[ 1.749213] sdhci-pci 0000:07:00.0: SDHCI controller found [197b:2382]
(rev 80)
[ 1.749348] mmc0: no vqmmc regulator found
[ 1.749350] mmc0: no vmmc regulator found
[ 1.749462] mmc0: SDHCI controller on PCI [0000:07:00.0] using ADMA
[ 1.749483] sdhci-pci 0000:07:00.2: SDHCI controller found [197b:2381]
(rev 80)
[ 1.749531] sdhci-pci 0000:07:00.2: Refusing to bind to secondary
interface.
[ 1.751339] [drm] Initialized drm 1.1.0 20060810

想請問上面這些log包含了哪些資訊
是不是sd card的host沒有驅動，或是須下指令用手動掛載？
小弟才疏學淺，還請板上前輩不吝指教，感激不盡 <(_ _)>

--