無法安裝第四顆硬碟 - 儲存設備

Regina avatar
By Regina
at 2018-04-01T18:19

Table of Contents

window找不到A硬碟磁區中的檔案,還要求格式化磁區
hddscan也讀不到A硬碟的smart數值
而且顯示A硬碟已使用的時間,突然暴增至少10倍

以easeus data recovery和recuva都能掃描到原有檔案
懷疑硬碟本身沒壞
但是磁區格式遺失
請問接下來該怎麼處理?

已經將A硬碟以sector by sector複製到新硬碟上
但是到複製流程完成98%時 軟體卻無法更新系統資訊而卡住
關掉軟體後還是看到A硬碟有複製到新硬碟

以下是複製硬碟軟體log
Partition Assistant log is as follows:
AOMEI Partition Assistant 6.0 Standard Edition

AOMEI Partition Assistant 6.0 Standard Edition
[0 ]disk.cpp(168) Disk0 is removble use?0
[0 ]disk.cpp(168) Disk1 is removble use?0
[0 ]disk.cpp(168) Disk2 is removble use?0
[0 ]disk.cpp(168) Disk3 is removble use?0
[23 ]ntfsdbr.cpp(128): $MFT start sector was read faulty!
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mftdatarun.cpp(259): Failed to read $MFT file record.
[2 ]mftdatarun.cpp(153): Failed to query the file record of $MFT.
[2 ]mft.cpp(102): Failed to initialize Data Run List of the $MFT.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mft.cpp(506): Read sector failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.
[23 ]ntfsdbr.cpp(128): $MFT start sector was read faulty!
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mftdatarun.cpp(259): Failed to read $MFT file record.
[2 ]mftdatarun.cpp(153): Failed to query the file record of $MFT.
[2 ]mft.cpp(102): Failed to initialize Data Run List of the $MFT.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mft.cpp(506): Read sector failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.
[23 ]ntfsdbr.cpp(128): $MFT start sector was read faulty!
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mftdatarun.cpp(259): Failed to read $MFT file record.
[2 ]mftdatarun.cpp(153): Failed to query the file record of $MFT.
[2 ]mft.cpp(102): Failed to initialize Data Run List of the $MFT.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mft.cpp(506): Read sector failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.

================================================================
AOMEI Partition Assistant Is Working...


==========================User Operations==============================
1.Copying Disk
Source Disk Number: 3
Destination Disk Number: 4
Copy Disk: From Disk3 to Disk4
Copy Method: S

=======================================================================

[0 ]cpysector.cpp(29): Begin move Unknown Volume by sector.
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030111,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030112,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030113,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030114,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030115,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030116,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030117,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 3030118,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291519,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291520,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291521,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291522,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291523,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291524,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291525,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 6291526,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429146,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429147,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429148,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429149,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429150,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429151,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429152,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429153,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429154,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429155,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429156,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429157,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429158,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429159,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429160,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429161,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429165,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429166,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429169,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429173,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429175,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429177,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429236,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429239,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10429240,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483082,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483083,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483084,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483085,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483086,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483087,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483088,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 10483089,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366075,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366076,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366077,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366078,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366079,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366080,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 13366081,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510237,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510238,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510239,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510240,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510241,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510242,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510243,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510244,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510245,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510246,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510247,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510248,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510249,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510250,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510251,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510252,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510253,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510254,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510255,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510256,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510257,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510258,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510259,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510260,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510261,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510262,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510263,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510264,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510265,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510266,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510267,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24510268,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637749,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637750,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637751,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637752,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637753,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637754,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637755,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 24637756,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017430,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017431,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017432,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017433,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017434,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017435,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017436,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017437,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017438,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017439,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017440,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017441,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017442,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017443,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017444,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017445,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017446,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017447,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017449,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017450,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017451,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 25017452,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208973,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208974,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208975,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208976,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208977,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208978,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208979,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 89208980,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 93417920,
count: 1
[23 ]cpysector.cpp(157): ReadSector Bad cluster, Start sector: 93417924,
count: 1
[2 ]cpysector.cpp(226): End move Unknown Volume by sector.
[0 ]optcore.cpp(3296): DestDiskSign = 259720950
[0 ]bcd.cpp(221): Failed to RegUnLoadKey BCD00000000.
[0 ]bcd.cpp(68): Failed to open:\Device\HarddiskVolume12\boot\bcd,
st=0xC0000102.
[2 ]bcd.cpp(78): Failed to ZwCreateFile.
[2 ]bcd.cpp(68): Failed to
open:\Device\HarddiskVolume12\EFI\Microsoft\boot\bcd, st=0xC0000102.
[2 ]bcd.cpp(78): Failed to ZwCreateFile.
[1392 ]DeleteFile(tcsFilePath) return code: 0x00000000, helper.cpp(495).
[0 ]bcd.cpp(221): Failed to RegUnLoadKey BCD00000000.
[0 ]bcd.cpp(68): Failed to open:\Device\HarddiskVolume12\boot\bcd,
st=0xC0000102.
[2 ]bcd.cpp(78): Failed to ZwCreateFile.
[2 ]bcd.cpp(68): Failed to
open:\Device\HarddiskVolume12\EFI\Microsoft\boot\bcd, st=0xC0000102.
[2 ]bcd.cpp(78): Failed to ZwCreateFile.
[1392 ]DeleteFile(tcsFilePath) return code: 0x00000000, helper.cpp(495).
[0 ]bcd.cpp(221): Failed to RegUnLoadKey BCD00000000.
[0 ]bcd.cpp(68): Failed to open:\Device\HarddiskVolume12\boot\bcd,
st=0xC0000102.
[2 ]bcd.cpp(78): Failed to ZwCreateFile.
[2 ]bcd.cpp(68): Failed to
open:\Device\HarddiskVolume12\EFI\Microsoft\boot\bcd, st=0xC0000102.
[2 ]bcd.cpp(78): Failed to ZwCreateFile.
[1392 ]DeleteFile(tcsFilePath) return code: 0x00000000, helper.cpp(495).
[0 ]disk.cpp(168) Disk0 is removble use?0
[0 ]disk.cpp(168) Disk1 is removble use?0
[0 ]disk.cpp(168) Disk2 is removble use?0
[0 ]disk.cpp(168) Disk3 is removble use?0
[23 ]ntfsdbr.cpp(128): $MFT start sector was read faulty!
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mftdatarun.cpp(259): Failed to read $MFT file record.
[2 ]mftdatarun.cpp(153): Failed to query the file record of $MFT.
[2 ]mft.cpp(102): Failed to initialize Data Run List of the $MFT.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mft.cpp(506): Read sector failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.
[23 ]ntfsdbr.cpp(128): $MFT start sector was read faulty!
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mftdatarun.cpp(259): Failed to read $MFT file record.
[2 ]mftdatarun.cpp(153): Failed to query the file record of $MFT.
[2 ]mft.cpp(102): Failed to initialize Data Run List of the $MFT.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mft.cpp(506): Read sector failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.
[23 ]ntfsdbr.cpp(128): $MFT start sector was read faulty!
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mftdatarun.cpp(259): Failed to read $MFT file record.
[2 ]mftdatarun.cpp(153): Failed to query the file record of $MFT.
[2 ]mft.cpp(102): Failed to initialize Data Run List of the $MFT.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[23 ]mft.cpp(148): $MFT start sector was read faulty!
[23 ]mft.cpp(506): Read sector failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[0 ]mft.cpp(89): The file record is invalid.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[0 ]mft.cpp(89): The file record is invalid.
[0 ]mft.cpp(515): Initialize MftFile failed.
[2 ]ntfslabel.cpp(28): Read the FILE_Volume file record failed.
[87 ]ntfsstd.cpp(96): Send FSCTL_GET_NTFS_VOLUME_DATA Control Code
failed.
[0 ]mft.cpp(89): The file record is invalid.
[2 ]mft.cpp(173): The data run list of $MFT is not initialization.
[2 ]ntfsstd.cpp(186): Failed to read $BITMAP file record.
[0 ]mft.cpp(89): The file record is invalid.


--

All Comments

Zanna avatar
By Zanna
at 2018-04-02T07:30
上次送一家資料救援感覺超棒!
https://i.imgur.com/PH0K3rH.jpg

跳電後硬碟檢測修復問題

Una avatar
By Una
at 2018-04-01T14:59
如題 早上跳電後,執行Chkdsk C: /f 結果如下 ================================================= Checking file system on C: The type of the file system is NTFS. A disk ...

RAMDisk的Read速度為何會遠低於實體RAM?

Delia avatar
By Delia
at 2018-04-01T14:47
RAMDisk的Read速度 為何會遠低於 實體RAM的Read速度? 以 SoftPerfect RAM Disk 切 實體RAM 的 1GB(1024MB)大小 指定於 Z槽 https://i.imgur.com/sKbLnRp.png CrystalDiskMark 測試 RAMDisk( ...

佛堂Seagate ST2000DM006星光價1885元

Ula avatar
By Ula
at 2018-04-01T02:19
https://www.isunfar.com.tw/product/?prodseq=212124 星光價時段 22:00~06:00 ST2000DM006,三年保固 2TB 3.5吋 64MB 7200轉 -- - ...

Google drive容量 大家都多少

Blanche avatar
By Blanche
at 2018-03-31T22:15
以前的google account 目前有115GB容量 但是比較新的帳號就只有15GB的容量 請問有辦法把每個新帳號擴充到115GB嗎? -- Apocalypse is coming! - ...

商店街的P購,滿千折200百

Carol avatar
By Carol
at 2018-03-31T22:09
技術面剛剛在 mobilecomm發了一帖,請自己過去看 總之,這張折價券. 以購物車來折扣 換言之 請買剛好過一千,現折 200 像是 plextor s2c 120G,折完剩 $1099 (剩一顆) 或是 大家最愛的 蛇蛇 120G ,折完剩 $888 反正, ...