我直接先把他的信件公開在這裡
看的懂英文的就直接看吧
大概就可以瞭解我會有點生氣、難過的原因
再補上中文說明
Dear Ian,
As mentioned earlier the keyboard G80-3000HKMUS has been obsoleted and is no
longer available. We have the following alternatives:
1) If the customer insists in USB hub we can offer G83-6504 (with 4 USB
downstream ports).
It can be done with Chinese characters and lasered keytops but it is not "MX"
switch (membrane keyboards)
2) For mechanical keyswitch solution we can offer G80-3000LUNUS-2: MX
keyswitches can be changed to MX1A-G1JW, lasered keytops, USB cable, but no
hub ports, US layout, 104 keys.
Note:
- for home position of F and J key it will be a small "bar", the so called
"deep dish"; curved design is no longer available.
- keycap material will be POM
- MOQ will be 1k units because in both cases it will be a custom version
- G80-3000 series is manufactured in our CZ facility, membrane keyboards are
produced in Auerbach-Germany
- Logo will be lasered on the top right hand side which is Cherry standard.
Please advise which model you chose.
regards
Raymond Chan
簡單講：我們之前不是有九大要求嗎？加上ENTER鍵一共十個
這還是放棄了2 shot key（二色成形）之後的協調
不過我現在跟大家說
他只能給這些規格：
1.黑色... （okay...不過這一點很基本）
2.按鍵為茶軸的MX1A-G1JW (okay...不過大家都知道這點沒有我也不想要)
3.雷射刻字（非兩色成形） (Okay...不過大家都知道這是讓步後的結果）
(之前他也跟我說二色成形完全不可能)
4.US104鍵配置，無中文注音 (Okay...不過這點也很基本)
5.USB介面 (Okay...這點雖基本，就算是他幫我爭取到的)
6.4 USB Port (No.....完全沒有辦法)
7.F、J兩鍵弧形定位(deep dish) (No.....還跟我說已經不再使用了)
8.PBT材質按鍵 (這點最讓我覺得奇怪，POM是哪種材質啊？)
(況且他之前在電話上答應我是可以PBT材質的)
9.CHERRY LOGO (要放在右手邊的上面)
10.ENTER鍵 (沒說...根本沒提到)
11.德國製造 (No..這個他真的在電話上答應我的，後來就改成捷克)
12.特殊型號 (應該算有給吧G80-3000LUNUS-2，不過這是加分用的)
於是以上12點中，除了一些他原本就答應我的之外
（不過那些都算是很基本的吧）
其他6.7.8.9.都給我亂七八糟
11.也是講過當空氣
最誇張的是，這樣的規格開給我
還跟我說是客製化了
還要我MOQ（最低規格） 一千把鍵盤
所以我收到信後的心情不太好
我想大家可以理解吧...-__-
先報告到這邊嚕...
--
All Comments