裝gcin的問題? - BBS

Ethan avatar
By Ethan
at 2005-05-26T14:30

Table of Contents

小弟我在裝gcin..make install後出現了以下的問題..
不知怎麼解決...希望有好心人能夠幫幫我

謝謝


# make install clean
===> Patching for zh-gcin-0.8.4
===> zh-gcin-0.8.4 depends on executable: gmake - found
===> zh-gcin-0.8.4 depends on file: /usr/local/bin/intltool-extract - not
found
===> Verifying install for /usr/local/bin/intltool-extract in
/usr/ports/textproc/intltool
===> Vulnerability check disabled
===> Extracting for intltool-0.33
=> Checksum OK for gnome/intltool-0.33.tar.bz2.
===> intltool-0.33 depends on file: /usr/local/bin/perl5.8.6 - found
===> Patching for intltool-0.33
===> intltool-0.33 depends on file: /usr/local/bin/perl5.8.6 - found
===> Applying FreeBSD patches for intltool-0.33
===> intltool-0.33 depends on file:
/usr/local/lib/perl5/site_perl/5.8.6/mach/XML/Parser.pm - not found
===> Verifying install for
/usr/local/lib/perl5/site_perl/5.8.6/mach/XML/Parser.pm in
/usr/ports/textproc/p5-XML-Parser
===> Vulnerability check disabled
===> Extracting for p5-XML-Parser-2.34_1
=> Checksum OK for XML-Parser-2.34.tar.gz.
===> p5-XML-Parser-2.34_1 depends on file: /usr/local/bin/perl5.8.6 - found
===> Patching for p5-XML-Parser-2.34_1
===> p5-XML-Parser-2.34_1 depends on file: /usr/local/bin/perl5.8.6 - found
===> p5-XML-Parser-2.34_1 depends on file: /usr/local/bin/perl5.8.6 - found
===> p5-XML-Parser-2.34_1 depends on shared library: expat.5 - found
===> Configuring for p5-XML-Parser-2.34_1
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LC_ALL = (unset),
LC_CTYPE = "zh_TW.zh_TW.UTF-8",
LANG = "zh_TW.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Checking if your kit is complete...
Looks good
Unable to find a perl 5 (by these names: /usr/local/bin/perl5.8.6 perl perl5
perl5.8.6 miniperl, in these dirs: /sbin /bin /usr/sbin /usr/bin /usr/games
/usr/local/sbin /usr/local/bin /usr/X11R6/bin /root/bin /usr/local/bin)
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LC_ALL = (unset),
LC_CTYPE = "zh_TW.zh_TW.UTF-8",
LANG = "zh_TW.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LC_ALL = (unset),
LC_CTYPE = "zh_TW.zh_TW.UTF-8",
LANG = "zh_TW.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
===> Building for p5-XML-Parser-2.34_1
0: not found
*** Error code 127

Stop in /usr/ports/textproc/p5-XML-Parser/work/XML-Parser-2.34.
*** Error code 1

Stop in /usr/ports/textproc/p5-XML-Parser.
*** Error code 1

Stop in /usr/ports/textproc/intltool.
*** Error code 1

Stop in /usr/ports/chinese/gcin.
*** Error code 1

Stop in /usr/ports/chinese/gcin.

--
Tags: BBS

All Comments

ports 安裝 tripwire 不行

Michael avatar
By Michael
at 2005-05-26T06:49
煩請各位指教 , 這是哪方面的問題 OS type : 4.11-release 安裝方式 : ports version : tripwire 2.3.1.2 在安裝之前有用cvsup更新ports tree , 也有用portupgrade error message如下: Checking for ...

Re: ssh遠端不能

Brianna avatar
By Brianna
at 2005-05-25T23:07
※ 引述《JSH.bbsatofo.csie.ntu.edu.tw (zzz...)》之銘言: : ※ 引述《ilay.bbsatptt.cc ( (爆!))》之銘言: : : 請問各位先進 : : 我的 inetd.conf 關於ssh的部份取消註解如下: : : ssh stream tcp ...

Re: Stop in /usr/ports/net/DarwinStreamingServer.

Sierra Rose avatar
By Sierra Rose
at 2005-05-25T12:35
※ 引述《and#34;Mitacand#34; andlt;mitacatbbs.openfind.com.twandgt;, 看板: FreeBSD》之銘言: : tech# make all install clean : ===andgt; 3proxy : ===andgt; 44bsd-rdist ...

Re: 安裝perl的問題

Frederic avatar
By Frederic
at 2005-05-24T19:16
※ 引述《CTEN (西田恩)》之銘言: : ※ 引述《CTEN (憲)》之銘言: : : 第一次出現這個問題的時候,我馬上去做了CVSUP. : : 然後同樣的下make -DENABLE_SUIDPERL install又做了兩次. : : 請問這個問題最近大家有遇到過嗎,怎麼解決呢? : 抱歉 再來求救 ...

Re: 安裝perl的問題

Hazel avatar
By Hazel
at 2005-05-24T02:46
※ 引述《CTEN (憲)》之銘言: : 第一次出現這個問題的時候,我馬上去做了CVSUP. : 然後同樣的下make -DENABLE_SUIDPERL install又做了兩次. : 請問這個問題最近大家有遇到過嗎,怎麼解決呢? 抱歉 再來求救一下 機器是這台:http://www.servelinux. ...