連線不到動態硬碟 - 儲存設備

※ 引述《jackoptt (燎原火)》之銘言：
: 昨天新買的WD 200G硬碟
: 在電腦A建立動態硬碟 並建立簡單磁碟區
: 然後剛開始一切都正常 200GB都有抓到
: 也丟了一大堆資料進去 後來把硬碟拔到另一台電腦B
: 也都正常
: 但是要拔回原來的電腦A時 卻連線不上了 接電腦B也連線不上 (BIOS都有讀到)
: 磁碟管理 "連線"是灰色的 也無法"重新啟動" 會出現錯誤訊息
: 我查閱了Log:
: 事件類型: 錯誤
: 事件來源: LDM
: 事件類別目錄: 無
: 事件識別碼: 2
: 日期: 2006/2/9
: 時間: 上午 12:09:41
: 使用者: N/A
: 描述:
: 內部錯誤 - 磁碟群組沒有正確的設定檔複本 (C10000B6)。請在
: http://go.microsoft.com/fwlink/events.asp 查看說明及支援中心，以取得其他資訊
: 事件類型: 錯誤
: 事件來源: LDM
: 事件類別目錄: 無
: 事件識別碼: 1500
: 日期: 2006/2/9
: 時間: 上午 12:09:46
: 描述:
: Disk group Mychat-b800f91fDg0: Errors in some configuration copies:
: Disk Harddisk1, copy 1: Block 0: Invalid magic number in the configuration
: copy請在 http://go.microsoft.com/fwlink/events.asp 查看說明及支援中心，以取
: 得其他資訊。
: 只剩下"轉換成基本硬碟"可以選 但是原來的資料會消失
: 請問有沒有辦法可以讓他再次連線上 或是不遺失資料下轉成基本硬碟?
: PS:已排除排線問題 換了三條排線 都是這樣
我自己找到的 希望有用

HOWTO: Convert a dynamic disk back to a basic disk without data loss
Posted By: o2
**Disclaimer: This ONLY works if you have NOT used ANY of the "new" features
of dynamic disks such as extending a partition or software RAID. This is an
expert-level procedure, so if you don't know what you are doing, you
shouldn't be attempting this.**

1) Install dskprobe.exe on the system. (This is one of the utilities in the
Windows 2000 support tools on the install CD, and can be installed by simply
copying the .exe file to the hard drive.)
2) Run dskprobe.exe on the system.
3) Select the Drives menu and "Physical Drive. . ."
4) Double click on the drive that you want to convert back to a basic disk.
Click the "Set Active" button next to that drive.
5) From the Sectors menu, select "Read"
6) Accept the defaults (begin sector 0, read 1 sector) and click "Read"
7) In the editor, go to the "01C0" line and the third bit should be a "42".
Change that to a "07". **Note, a few machines have had this on the "01D0"
line instead. I don't know what that means, so I wouldn't try it unless it is
on a pure test box. *****
8) From the Sectors menu, select "Write". Confirm all dialog boxes. **Note:
This is the step that will hose your box if you have not followed the above
instructions correctly.**
9) Exit dskprobe.exe. Reboot
10) Run chkdsk on the affected logical drive(s). If any errors are found, do
a chkdsk /f to fix them. Done.


***** svdsinner writes: I did some research, and this relates to having
multiple partitions on the drive. I assume partition 1 would be at "01C0",
Partition 2 would be at "01D0", Partition 3 would be "01E0", and Partition 4
would be "01F0". I would assume that you would be required to change every
partion on the drive back for this to work. However, I have not tested this.
Do so at your own risk.

Special thanks go to svdsinner!


--