Re: 有人在DELL PowerEdge 1950Ⅲ安裝過freebsd嗎? - BBS

Tracy avatar
By Tracy
at 2009-07-17T12:47

Table of Contents

※ 引述《dppman (*^o^*)》之銘言:
: ※ 引述《seansnow (Sean)》之銘言:
: : 可以呀,學校伺服器都是Dell 1950。
: : 我有管一台Dell 2950,FreeBSD可以正常運作,沒有問題。
: 可以分享一下您管得Dell 2950/1950的硬體配備嗎?
: 尤其是RAID Card...
: Thnaks in advance!

PE 1950 or PE 2950 無論是搭配 PERC 4/i, 5/i 都可以正常裝 FreeBSD 啊..


FreeBSD 7.2 amd64, DELL PowerEdge 1950 with PERC 5/i RAID Controller
Integrated RAID controller

%dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009
[email protected]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (1997.00-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x40ce33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 4277047296 (4078 MB)
avail memory = 4104503296 (3914 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci6: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 00:22:19:54:7c:64
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
(0x04040105); Flags( MFW MSI )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pci10: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pci11: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib8
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc5c0000-0xfc5dffff irq 78
at device 14.0 on pci2
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 1708 (300549649s/0x0020/info) - Shutdown command received from host
mfi0: 1709 (boot + 0s/0x0020/info) - Firmware initialization started (PCI ID
0015/1028/1f03/1028)
mfi0: 1710 (boot + 0s/0x0020/info) - Firmware version 1.03.50-0461
mfi0: 1711 (boot + 27s/0x0008/info) - Battery Present
mfi0: 1712 (boot + 27s/0x0020/info) - Package version 5.2.2-0072
mfi0: 1713 (boot + 54s/0x0004/info) - Enclosure (SES) discovered on PD
08(e1/s255)
mfi0: 1714 (boot + 54s/0x0002/info) - Unexpected sense: PD 08(e1/s255), CDB:
1c 01 01 08 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00
00
mfi0: 1715 (boot + 55s/0x0002/info) - Inserted: PD 08(e1/s255)
mfi0: 1716 (boot + 55s/0x0002/info) - Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00, sasAddr=5001e0f0249cb600,0000000000000000
mfi0: 1717 (boot + 55s/0x0002/info) - Inserted: PD 00(e1/s0)
mfi0: 1718 (boot + 55s/0x0002/info) - Inserted: PD 00(e1/s0) Info: enclPd=08,
scsiType=0, portMap=01, sasAddr=5000c5000f1b8de9,0000000000000000
mfi0: 1719 (boot + 55s/0x0002/info) - Inserted: PD 01(e1/s1)
mfi0: 1720 (boot + 55s/0x0002/info) - Inserted: PD 01(e1/s1) Info: enclPd=08,
scsiType=0, portMap=02, sasAddr=5000c5000f1b8b41,0000000000000000
mfi0: [ITHREAD]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pci13: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci14: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 7.0 on pci0
pci15: <PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: Ethernet address: 00:22:19:54:7c:62
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
(0x04040105); Flags( MFW MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xdce0-0xdcff
irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xdcc0-0xdcdf
irq 20 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xdca0-0xdcbf
irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xdc80-0xdc9f
irq 20 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600400-0xfc6007ff irq 21 at
device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
uhub5: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on
uhub4
uhub5: multiple transaction translators
uhub5: 2 ports with 2 removable, self powered
ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5
kbd2 at ukbd0
ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 4> on
uhub4
uhub6: multiple transaction translators
uhub6: 4 ports with 4 removable, self powered
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xd0000000-0xd7ffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci16
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
p4tcc7: <CPU Frequency Thermal Control> on cpu7
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AG> at ata0-master UDMA33
mfi0: 1721 (300463583s/0x0020/info) - Time established as 07/09/09 14:06:23;
(55 seconds since power on)
mfid0: <MFI Logical Disk> on mfi0
mfid0: 139392MB (285474816 sectors) RAID volume 'Virtual Disk 0' is optimal
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
GEOM_LABEL: Label for provider mfid0s1a is ufsid/4a17ed414724d2b0.
GEOM_LABEL: Label for provider mfid0s1d is ufsid/4a17ed41fb0190c3.
GEOM_LABEL: Label for provider mfid0s1e is ufsid/4a17ed41ab8aa248.
GEOM_LABEL: Label for provider mfid0s1f is ufsid/4a17ed415db530c2.
Trying to mount root from ufs:/dev/mfid0s1a
GEOM_LABEL: Label ufsid/4a17ed414724d2b0 removed.
GEOM_LABEL: Label for provider mfid0s1a is ufsid/4a17ed414724d2b0.
GEOM_LABEL: Label ufsid/4a17ed41ab8aa248 removed.
GEOM_LABEL: Label for provider mfid0s1e is ufsid/4a17ed41ab8aa248.
GEOM_LABEL: Label ufsid/4a17ed415db530c2 removed.
GEOM_LABEL: Label for provider mfid0s1f is ufsid/4a17ed415db530c2.
GEOM_LABEL: Label ufsid/4a17ed41fb0190c3 removed.
GEOM_LABEL: Label for provider mfid0s1d is ufsid/4a17ed41fb0190c3.
GEOM_LABEL: Label ufsid/4a17ed414724d2b0 removed.
GEOM_LABEL: Label ufsid/4a17ed41ab8aa248 removed.
GEOM_LABEL: Label ufsid/4a17ed415db530c2 removed.
GEOM_LABEL: Label ufsid/4a17ed41fb0190c3 removed.
mfi0: 1722 (300463640s/0x0008/info) - Battery temperature is normal
mfi0: 1723 (300463640s/0x0008/info) - Battery started charging
mfi0: 1724 (300463640s/0x0008/info) - Current capacity of the battery is
above threshold
bce1: link state changed to UP
bce1: link state changed to DOWN
bce1: link state changed to UP
mfi0: 1725 (300464810s/0x0008/info) - Battery charge complete
mfi0: 1726 (300596400s/0x0020/info) - Patrol Read started
mfi0: 1747 (300598227s/0x0020/info) - Patrol Read complete

%uname -a
FreeBSD vpn 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
07:18:07 UTC 2009
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64

%pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x80868086 chip=0x25c08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000X Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25e28086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 2'
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 3'
class = bridge
subclass = PCI-PCI
pcib10@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 4-5'
class = bridge
subclass = PCI-PCI
pcib11@pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 5'
class = bridge
subclass = PCI-PCI
pcib12@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 6-7'
class = bridge
subclass = PCI-PCI
pcib13@pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086
rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 7'
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:16:0: class=0x060000 card=0x01b31028 chip=0x25f08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:16:1: class=0x060000 card=0x01b31028 chip=0x25f08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:16:2: class=0x060000 card=0x01b31028 chip=0x25f08086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:17:0: class=0x060000 card=0x80868086 chip=0x25f18086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:19:0: class=0x060000 card=0x80868086 chip=0x25f38086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:21:0: class=0x060000 card=0x80868086 chip=0x25f58086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:22:0: class=0x060000 card=0x80868086 chip=0x25f68086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
pcib14@pci0:0:28:0: class=0x060400 card=0x01b31028 chip=0x26908086
rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 PCIe Root Port 1'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x01b31028 chip=0x26888086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x01b31028 chip=0x26898086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x01b31028 chip=0x268a8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x01b31028 chip=0x268b8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x01b31028 chip=0x268c8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib16@pci0:0:30:0: class=0x060401 card=0x00000000 chip=0x244e8086
rev=0xd9 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface
to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x26708086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x01b31028 chip=0x269e8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
pcib2@pci0:6:0:0: class=0x060400 card=0x00000000 chip=0x35008086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Upstream Port'
class = bridge
subclass = PCI-PCI
pcib6@pci0:6:0:3: class=0x060400 card=0x00000000 chip=0x350c8086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe to PCI-X Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:7:0:0: class=0x060400 card=0x00000000 chip=0x35108086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E1'
class = bridge
subclass = PCI-PCI
pcib5@pci0:7:1:0: class=0x060400 card=0x00000000 chip=0x35148086
rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E2'
class = bridge
subclass = PCI-PCI
pcib4@pci0:8:0:0: class=0x060400 card=0x00000000 chip=0x01031166
rev=0xc3 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'BCM5715 Broadcom dual gigabit, pci bridge'
class = bridge
subclass = PCI-PCI
bce0@pci0:9:0:0: class=0x020000 card=0x01b31028 chip=0x164c14e4
rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = '5708C Broadcom NetXtreme II Gigabit Ethernet Adapter'
class = network
subclass = ethernet
pcib8@pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x03708086
rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '80333 Segment-A PCI Express-to-PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib9@pci0:1:0:2: class=0x060400 card=0x00000000 chip=0x03728086
rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '80333 Segment-B PCI Express-to-PCI Express Bridge'
class = bridge
subclass = PCI-PCI
mfi0@pci0:2:14:0: class=0x010400 card=0x1f031028 chip=0x00151028
rev=0x00 hdr=0x00
vendor = 'Dell Computer Corporation'
device = 'PERC 5/i RAID Controller Integrated RAID controller'
class = mass storage
subclass = RAID
pcib15@pci0:4:0:0: class=0x060400 card=0x00000000 chip=0x01031166
rev=0xc3 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'BCM5715 Broadcom dual gigabit, pci bridge'
class = bridge
subclass = PCI-PCI
bce1@pci0:5:0:0: class=0x020000 card=0x01b31028 chip=0x164c14e4
rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = '5708C Broadcom NetXtreme II Gigabit Ethernet Adapter'
class = network
subclass = ethernet
vgapci0@pci0:16:13:0: class=0x030000 card=0x01b31028 chip=0x515e1002
rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Radeon ES1000 Radeon ES1000'
class = display
subclass = VGA


--
靜中見真境,淡中識本然

--
Tags: BBS

All Comments

沒有VGA Card下安裝FreeBSD 7.2?

Aaliyah avatar
By Aaliyah
at 2009-07-17T12:35
※ 引述《dppman (*^o^*)》之銘言: : 請問一下, : 手上目前有一台x86架構的怪機器, : 沒有VGA Card,也沒有com port,但是有 : USB port. : 請問這樣的狀況下,怎麼安裝 : FreeBSD呢? : Thanks in advance! ...

沒有VGA Card下安裝FreeBSD 7.2?

Franklin avatar
By Franklin
at 2009-07-09T22:33
請問一下, 手上目前有一台x86架構的怪機器, 沒有VGA Card,也沒有com port,但是有 USB port. 請問這樣的狀況下,怎麼安裝 FreeBSD呢? Thanks in advance! - ...

SVN在post-commit裡如何顯示repository …

Victoria avatar
By Victoria
at 2009-07-08T13:29
※ [本文轉錄自 Linux 看板] 作者: machette (:() 看板: Linux 標題: [問題] SVN在post-commit裡如何顯示repository的名字???????????? 時間: Wed Jul 8 13:28:38 2009 我設了讓commit完會寄mail的hoo ...

FreeBSD.org 是否在維護中?

Hamiltion avatar
By Hamiltion
at 2009-07-06T14:30
portaudit 一直fail ? 有人可以試試嗎? -- Sometimes I feel sitting on trains Every stop I get to Iand#39;m clocking that game Everyoneand#39;s a winner, weand#39;re ...

xorg 鼠鍵無法使用

Agnes avatar
By Agnes
at 2009-07-04T00:14
我的系統是 7.2 stable 在 xorg-7.4_2 鼠 microsoft的光學usb ums0: andlt;Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2andgt; on uhub1 ums0: 3 button ...