開機後 無法進入Windows - Windows
By Emily
at 2005-10-06T22:29
at 2005-10-06T22:29
Table of Contents
系統:Win XP
開機後 原本前面跑完 應該再來就要出現Windows的歡迎使用的畫面
不過卻出現下面的畫面 是黑底白字
------------------------------------------------------
Novell NetWare Ready Firmware v3.16 (010813)
(c) Copyright 1998 - 2000 Novell,Inc. All Right Reserved.
Realtek RTL8139(A/B/C)/8130/810X Fast Ethernet MLID v3.64 (010816)
(c) Copyright 2001, by Realtek Semiconductor Corp. All rights reserved.
Fullduplex environment,
RPL-ROM-ADR:0020 ED17 BFD7
RPL-ROM-IRQ:5
RPL-ROM-PIO:D400
RPL-ROM-FFC:0
------------------------------------------------------
↑上面這個黃色的值會從0開始增加一直跑到50
接著就會跳到下面的畫面 也是黑底白字
------------------------------------------------------
Boot Failure from Previous Device
Searching for Boot Record from SCSI...Not Found
Boot Failure
Rebot and Select proper Boot device
or Insert Boot Media in select Boot device
Press any key when ready
------------------------------------------------------
然後我再按下任意鍵時 就會出現像是剛開機尋找硬體的畫面
硬碟 CD-ROM 軟碟 統統都出現...Not Found
然後又是Press any key when ready
不過按一次或兩次Reset鈕 重開機後又可以進入Windows
但是下次重開機時又會出現 一定要再按Reset鈕一次或兩次才能進入Windows
請問這樣是什麼地方出問題了呢 還是有啥沒插好 謝謝解答 <(_ _)>
--
開機後 原本前面跑完 應該再來就要出現Windows的歡迎使用的畫面
不過卻出現下面的畫面 是黑底白字
------------------------------------------------------
Novell NetWare Ready Firmware v3.16 (010813)
(c) Copyright 1998 - 2000 Novell,Inc. All Right Reserved.
Realtek RTL8139(A/B/C)/8130/810X Fast Ethernet MLID v3.64 (010816)
(c) Copyright 2001, by Realtek Semiconductor Corp. All rights reserved.
Fullduplex environment,
RPL-ROM-ADR:0020 ED17 BFD7
RPL-ROM-IRQ:5
RPL-ROM-PIO:D400
RPL-ROM-FFC:0
------------------------------------------------------
↑上面這個黃色的值會從0開始增加一直跑到50
接著就會跳到下面的畫面 也是黑底白字
------------------------------------------------------
Boot Failure from Previous Device
Searching for Boot Record from SCSI...Not Found
Boot Failure
Rebot and Select proper Boot device
or Insert Boot Media in select Boot device
Press any key when ready
------------------------------------------------------
然後我再按下任意鍵時 就會出現像是剛開機尋找硬體的畫面
硬碟 CD-ROM 軟碟 統統都出現...Not Found
然後又是Press any key when ready
不過按一次或兩次Reset鈕 重開機後又可以進入Windows
但是下次重開機時又會出現 一定要再按Reset鈕一次或兩次才能進入Windows
請問這樣是什麼地方出問題了呢 還是有啥沒插好 謝謝解答 <(_ _)>
--
Tags:
Windows
All Comments
Related Posts
office軟體出現IJ561401.cab....
By Edith
at 2005-10-06T18:23
at 2005-10-06T18:23
Re: 如何解決DVD燒錄到1%就不動的問題
By Kelly
at 2005-10-06T18:18
at 2005-10-06T18:18
有關win xp使用者帳號的問題
By Daniel
at 2005-10-06T18:08
at 2005-10-06T18:08
Re: 怪怪的電腦, 還是怪怪的網路?
By Freda
at 2005-10-06T17:58
at 2005-10-06T17:58
Re: 拜託大家幫忙解救我的平板電腦~~
By Joseph
at 2005-10-06T17:50
at 2005-10-06T17:50