電腦跳藍白 - Windows

By Victoria
at 2010-09-01T19:21
at 2010-09-01T19:21
Table of Contents
錯誤訊息:
A problem has been detected and windows has been shut down to prevent
damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
if this is the first time you've seen this top error screen restart
your computer.id this screen appears again, follow these steps
check to make sure any new hardware or software is properly installed.
if this is a new installation ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable component, restart
your computer, press F8 to select Advance startup Options, and then
select Safe Mode.
以上是執行 war3 以及 sc2 會出現的藍白畫面
小弟的電腦:
CPU: Intel CORE Dou2 E7400 2.8GHz
顯卡: ASUS EN9800GT
ram: 4G
OS: Windows XP pack3
小弟有上網google了一下這個錯誤訊息有下面這個結果但看不太懂
0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online MSDN article.)
Requested data was not in memory. An invalid system memory address was
referenced. Defective memory (including main memory, L2 RAM cache, video
RAM) or incompatible software (including remote control and antivirus
software) might cause this Stop message, as may other hardware problems
(e.g., incorrect SCSI termination or a flawed PCI card). Use the General
Troubleshooting of STOP Messages checklist above.
原網頁: http://aumha.org/a/stop.htm
可以請各位高手幫忙解惑一下嗎 @@?
剛剛看到中文翻譯
0x00000050:PAGE_FAULT_IN_NONPAGED+AREA
◆錯誤分析:有問題的記憶體(包括屋裡記憶體、L2 CACHE、顯示卡記憶體)、不相容
的軟體(主要是遠程控制和殺毒軟體)、損壞的NTFS卷以及有問題的硬體(比如:PCI插
卡本身已損壞)等都會引發這個錯誤.
◇解決方案:請使用前面介紹的一般解決方案中與記憶體、軟體、硬體、硬盤等相關
的方案進行復原.
但是還是沒很懂 @@
--
A problem has been detected and windows has been shut down to prevent
damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
if this is the first time you've seen this top error screen restart
your computer.id this screen appears again, follow these steps
check to make sure any new hardware or software is properly installed.
if this is a new installation ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable component, restart
your computer, press F8 to select Advance startup Options, and then
select Safe Mode.
以上是執行 war3 以及 sc2 會出現的藍白畫面
小弟的電腦:
CPU: Intel CORE Dou2 E7400 2.8GHz
顯卡: ASUS EN9800GT
ram: 4G
OS: Windows XP pack3
小弟有上網google了一下這個錯誤訊息有下面這個結果但看不太懂
0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online MSDN article.)
Requested data was not in memory. An invalid system memory address was
referenced. Defective memory (including main memory, L2 RAM cache, video
RAM) or incompatible software (including remote control and antivirus
software) might cause this Stop message, as may other hardware problems
(e.g., incorrect SCSI termination or a flawed PCI card). Use the General
Troubleshooting of STOP Messages checklist above.
原網頁: http://aumha.org/a/stop.htm
可以請各位高手幫忙解惑一下嗎 @@?
剛剛看到中文翻譯
0x00000050:PAGE_FAULT_IN_NONPAGED+AREA
◆錯誤分析:有問題的記憶體(包括屋裡記憶體、L2 CACHE、顯示卡記憶體)、不相容
的軟體(主要是遠程控制和殺毒軟體)、損壞的NTFS卷以及有問題的硬體(比如:PCI插
卡本身已損壞)等都會引發這個錯誤.
◇解決方案:請使用前面介紹的一般解決方案中與記憶體、軟體、硬體、硬盤等相關
的方案進行復原.
但是還是沒很懂 @@
--
Tags:
Windows
All Comments
Related Posts
請教Raid+AHCI

By Ingrid
at 2010-09-01T18:50
at 2010-09-01T18:50
WIN7 matlab2010無法安裝

By Sarah
at 2010-09-01T17:20
at 2010-09-01T17:20
sku011.cab

By Heather
at 2010-09-01T15:32
at 2010-09-01T15:32
麥克風輸出問題

By Daniel
at 2010-09-01T14:59
at 2010-09-01T14:59
win7安裝 第一次重開機後卡住

By Victoria
at 2010-09-01T14:00
at 2010-09-01T14:00